Visimaster — Varad Automation & Robotics Pvt. Ltd.
Machine platforms · Visimaster range

Optical Inspection and Sorting Machine – Glass Disc

Fasteners, O-rings, washers & turned parts inspected from every side on a rotating glass disc.

300 PPM · 5 µm
Compare
Published specification
Key features
  • Detailed Dimensional & Surface Defects Inspection
  • Repeatability starts from 5 micron
  • Inspection Speed up to 300 PPM.
  • Manual as well as Auto loading systems.
  • Quantity wise separate OK Ejections
  • Can check OCR & OCV
  • Internal Thread Present/ Absent
Can inspect
FastenersPrecision machine partsTurned componentsPrecision brass componentsPrecision automotive componentsPlastic & Rubber Parts
Inspection parameters
Inner DiameterOuter DiameterAngleHeight

Surface defects: Scratch, Dent Detection, Damages, Burr, Cut marks, Crack, Thread Damage, Surface Deformities Detection, Colour Detection, Texture Verification

Other checks: Absence/Presence verification, Operation Missing, OCR-OCV, Hole Detection

Dedicated part configurations

Glass Disc Machine for Washers Inspection

300 PPM · washers & shims
Key features
  • Manual as well as Auto loading systems.
  • Inspection Speed up to 300 PPM.
  • Precise Dimensional Measurement
  • Single Program/ Common Model
Can inspect
ShimCirclipsWashersStamping Parts
Inspection parameters
IDODThickness

Surface defects: Dent Mark, Chip Off, Black Spot, Outer Burr, Foreign Material, Pit Mark, Line Mark, Burr on OD, Plating Defect & Cut Mark

Other checks: Bend

Glass Disc Machine for O Rings Inspection

Up to 600 PPM · O rings
Key features
  • Manual as well as Auto loading systems.
  • Inspection Speed up to 600 PPM.
  • Quantity wise separate OK Ejections
  • Detailed Dimensional & Surface Defects Inspection
Can inspect
O RingsX RingsSquare Rings
Inspection parameters
ThicknessInner DiameterOuter DiameterCross Section

Surface defects: Dirt Mark, Flow Mark, ID Dent, ID Cut, OD Dent, Bend, Flash, Cut Mark, Peel Off & Short Mould

Glass Disc Machine for Nuts Inspection

300 PPM · thread checks
Key features
  • Manual as well as Auto loading systems.
  • Inspection Speed up to 300 PPM.
  • Thread Present/ Absent/ Pitch Variation
  • Quantity wise separate OK Ejections
  • Detailed Dimensional & Surface Defects Inspection
Can inspect
Hex NutsFlange NutsSquare nutsWeld NutsDome NutsNyloc Nuts
Inspection parameters
AngleHeighthalf threadInner DiameterOuter DiameterAcross FlatAcross CornerThread Presence/ Absence

Surface defects: Damage, Head Crack, Head Damage, ID Thread Damage, Cut Mark, Scratch Detection, Dent Detection, Thread Burr, Half Thread

Other checks: OCR-OCV, absence/presence verification

Glass Disc Machine for Bolts Inspection

300 PPM · 360° + OCR
Key features
  • Hole Continuity Inspection
  • Inspection Speed up to 300 PPM
  • 360° Defects Detection
  • Optical Characters Recognition/ Verification (OCR/ OCV)
  • Thread Measurement & Defects Detection
Can inspect
ScrewsAllen BoltsFlange BoltsFlat Head BoltsHex Bolts, Banjo Bolts
Inspection parameters
AngleHeighthalf threadOuter DiameterMajor Dia, Minor Dia, PCDThread Presence/ Absence

Surface defects: Head Damage, Shank Damage, Hex Damage, Head Crack, Thread Dent, Dirt Mark, Thread Crack, Burr, Thread Damage

Other checks: Hole detection, OCR-OCV, Operation Missing, Absence/Presence Verification

Glass Disc Machine for Precision Parts Inspection

300 PPM · turned parts
Key features
  • Thread Present/ Absent
  • Quantity wise separate OK Ejections
  • Inspection Speed up to 300 PPM.
  • Manual as well as Auto loading systems.
  • Detailed Dimensional & Surface Defects Inspection
Can inspect
Precision machine partsTurned componentsPrecision brass componentsPrecision automotive components
Inspection parameters
AngleHeightHalf threadInner DiameterOuter DiameterThread Presence/ Absence

Surface defects: Cut marks, Dent Detection, Scratch Detection, Damage, Crack, Burr, Thread damage, Colour Detection, Texture Verification, Surface Deformities Detection

Other checks: Absence/Presence Verification, Operation missing, OCR-OCV, Hole Detection

Glass Disc Machine for Plastic & Rubber Parts Inspection

300 PPM · soft parts
Key features
  • Quantity wise separate OK Ejections
  • Manual as well as Auto loading systems.
  • Inspection Speed up to 300 PPM.
  • Detailed Dimensional & Surface Defects Inspection
Can inspect
Plastic PartsRubber Parts
Inspection parameters
Inner DiameterOuter DiameterAngleHeight

Surface defects: Colour Detection, Scratch Detection, Flash, Cut Marks, Flow Mark, Damage, Short Mould, Crack, Texture Verification, Surface Deformities Detection, Foreign Material

600+Installations
250+Clients
80%Repeat clientele
70+Engineers
Explore the other machines
Metal DiscRobotic SortingVertical VisigaugeHorizontal VisigaugeNano Glass DiscDouble DiscBleeder Screw InspectionThru ScanConveyorised InspectionLinear Pick & PlaceRobotic Assembly

Will it work on your part?

Ask Visi, our AI sales engineer — or courier 50–100 sample parts to our Bhosari lab for a free feasibility study. A vision engineer confirms what the machine can catch on your exact component.

Back to all machines